Stainless Steel Hygienic Sanitary Butterfly Valve /Pneumatic Manual Safety Valve/Ball Valve/Check Valve/Control Valve

This product mainly consists of body, stem, disc, seatAL-Bronze bushings etc.The rotation of actuating devicemakes stem and disc revolved which ensures on-off operations and flow control .The rotation ofthe actuating deviceensures dependability and position disc control and position disc control and water flowcontrol.Rotate handle wheel clockwisethe valve is close.

1.Castings
According to the materials specified accurately,ensure the casting material.

2.Machining
Fully automatic control machining,never allow a trace of erron.

3.Painting
Painting by ourselves to ensure the color is accurate and uniform.

4.Assemblly
All assembly workers shall have at leastone vear assembly experience, and the manager shall conduct samplinanspection during assembly.

5.Tests
Every vaive has to pass the test report before shipment.

6.Clean & Make up
The valves should be dlean and make up byprofessional valve beautician.

1.Driving device flange
Can be used in handles,gear operators,eletric or pneumatic acuators 
2.Bushing 
Reduce driving torquesupportstem,and ffectively separate it with valve body reduce wear of stem
3. Surface of disc axle hole
Through treatment of polishingprecisely ft with seat.
4. High precision disc external profile
Reach the requirement of bubbl-tight.small start and stop torque ,longer usage life of seat
5.Stem seal 
Stem is not easy to be distortedeliminating possible leakage in stem
6. Strong precision key 
Give psible attachment for manual lever or actuator
7. Precision taper pin
Ensure positive vibralion prooft.Stem to disc connection. Easily field replaceable.
8. Integral stem design
High precision and rlabilt,convenient for start.

Packaging and transportation advantages
1.Using waterproof membrane transportation is moreconvenient
2.Thicker wooden boxes make transportation safer
3.Choose sea transportation to make products more secure

Tianjin Aoruite Valve Co.,Ltd. is located in Tianjin Jinnan District,Company strong forces, engaged in processing valves 20 years of practical experience ir eprofessional technician,engineer existingfour,more than 10 professional technicians, ore than 10 craft,the company repeatedly as"the quality of the revitalization demonstration enterprises in Tianjin demonstration products",the domestic Tianjin market popular product "," socially accepted satisfaction",the China Quality Association recommended as" good product quality inspection,"while China Market Research Center awarded" China quality service reputation AAAenterprise",was named"Credible"units. products are sold throughout the country and exported to Russia.

BEONCY AFTER  SALES SERVICES
Beoncy pre-sales Services:

To acheieve the top combination of technology and sales services,so that users have a service experience in every purchase.
A.Communicate with customers about product technologu before purchasing and give suggetsions.
B.Provide professional drawings to avoid errors.
C.Design and produce products reasonably according to customer requirements.


Beoncy on-sale Services:

A.Compare price,quality and service to achieve the best cost performance.
B.Strict contract terms and careful attention to every small requirement of customers.
C.Keep communication with customers in the production process.The model,caliber,quantity,standard,color,valve label,casting and so on need to be confirmed again.


Beoncy After-sale Services:

A.Provide product certificates,inspection certificates,installation indtructions etc.,according to the contract.
B.The company will deal with the non-conformity of contract resuirements within 2 hours.
C.The warranty period for all valves is 12-18months from the date of acceptance.
D.If product quality problems occur under correct installation and use,our company will be responsible to the end.
E.Provide spare parts,debugging and maintenance services.
F.Any after-sales feedback will be resolved within 24 hours.

1.How can I know you are factory or trader?
-----We can use face time to show you around,to let you check all of our factory informations,from castings to the machining and paint.....

2.Can I get a sample?
-----Sample is free,only you need to pay the DHL cost.

3.I`m new buyer,I don`t know hoe to import from your company.
-----First of all choose the valve you need, then once you accept our prices,we can also quote you the freight cost from Tianjin China to your country.
The shipping forwarder will clear the customs for you.